ADVERTISEMENT
Therefore, in this case, the defective part must be repaired. In short, the causes can be multiple, however, do you know how to repair a toasted light bulb in a short time? What we’re going to tell you is the method used by electricians. Very little is enough: let’s find out more.
The procedure for repairing a toasted ampoule: simple and quick
To repair a toasted light bulb, you will need a small screwdriver, electric tape, LED wire and tapered clamp. Before you start, think about cutting the lamp power, this is the first step to work safely.
First, use the screwdriver to remove the broken LED bulb from the lamp, be careful not to touch the glass of the bulb, as you may burn yourself. After removing the broken ampoule, remove the filament from the broken ampoule with a tapered clamp.
Then you will have to replace the LED chain that you bought in your trusted hardware. Weld it perfectly with an adhesive tape. Finally, insert the bulb into the lamp and turn it on again.
You’ll fix it in a few things, in less than 2 minutes. Unbelievable, right? The remedies to be made themselves are always the best, because in addition to being cheap, they are also very easy, practical and quick. However, if you don’t feel confident about doing this little operation, contact an electrician.
